How to Replace Apple AirTag Battery
In today’s fast-paced world, losing personal items has become a common concern. Apple AirTags have emerged as a reliable solution to keep track of your belongings. However, with regular use, the battery inside the AirTag may eventually run out. In this article, we will guide you through the process of replacing the Apple AirTag battery, ensuring that you can continue using this handy device to locate your items.
What You Will Need
Before diving into the replacement process, it’s essential to gather the necessary tools and materials. Here’s a list of items you will need:
1. Replacement battery (CR2032)
2. Suction cup or a flathead screwdriver
3. Needle-nose pliers
4. Scissors or a knife
5. Isopropyl alcohol and a cotton swab (optional)
Step-by-Step Guide to Replace Apple AirTag Battery
1.
Unscrew the back cover
– Start by placing the AirTag on a flat surface with the top facing up.
– Use the suction cup or a flathead screwdriver to gently lift the back cover from the bottom edge.
– Carefully pull the cover away from the AirTag, ensuring not to apply too much force that might damage the adhesive.
2.
Remove the old battery
– Once the back cover is off, you will see the CR2032 battery.
– Use the needle-nose pliers to gently pull the old battery out from its compartment.
– Be cautious while handling the battery to avoid damaging the contacts.
3.
Insert the new battery
– Take the new CR2032 battery and align it with the contacts inside the compartment.
– Carefully place the new battery into the compartment, ensuring that the contacts make proper contact with the battery.
– Avoid touching the battery’s contacts with your fingers to prevent any potential corrosion.
4.
Reassemble the AirTag
– Once the new battery is in place, align the back cover with the bottom edge of the AirTag.
– Press down on the cover until it clicks into place, securing it to the AirTag.
– Make sure the cover is properly sealed to prevent any water or dust from entering the device.
5.
Test the AirTag
– After reassembling the AirTag, use the Find My app on your iPhone to test its functionality.
– Ensure that the AirTag is recognized and working correctly by checking its location and battery status.
Conclusion
Replacing the Apple AirTag battery is a straightforward process that can be completed in just a few minutes. By following the steps outlined in this article, you can ensure that your AirTag remains functional and ready to help you locate your belongings. Remember to handle the battery with care and use the appropriate tools to avoid any damage to the device.
