How to Install Bathtub Drain Stopper
Installing a bathtub drain stopper is a simple task that can greatly enhance the functionality and convenience of your bathroom. Whether you’re replacing an old stopper or installing one for the first time, following these steps will ensure a successful installation. In this article, we will guide you through the process of installing a bathtub drain stopper step by step.
Materials Needed:
Before you begin, gather the following materials:
– Bathtub drain stopper
– Adjustable wrench
– Screwdriver
– Pliers
– plumber’s grease (optional)
Step 1: Remove the Old Drain Stopper (if applicable)
If you’re replacing an old drain stopper, start by removing it. Place the adjustable wrench over the top of the drain stopper and turn it counterclockwise to loosen it. Once it’s loose, pull the stopper out of the drain.
Step 2: Clean the Drain
Before installing the new drain stopper, clean the drain to ensure there are no debris or buildup that could interfere with the installation. Use a toothbrush or a small brush to scrub the drain and remove any dirt or hair.
Step 3: Install the New Drain Stopper
Now, it’s time to install the new drain stopper. Place the new stopper into the drain, making sure it’s seated properly. The stopper may have a rubber gasket that helps create a seal; ensure it’s in place.
Step 4: Attach the Lever (if applicable)
Some bathtub drain stoppers come with a lever that controls the stopper. If your stopper has a lever, attach it to the drain stopper by inserting the threaded portion of the lever into the threaded hole on the stopper. Tighten the lever with a screwdriver until it’s securely in place.
Step 5: Test the Stopper
After installing the drain stopper, turn on the faucet to check for leaks. If you notice any leaks, apply plumber’s grease to the threads of the stopper and re-tighten it. Test the stopper by running water and ensuring it closes and opens correctly.
Step 6: Reassemble the Bathtub (if applicable)
If you had to disassemble any parts of the bathtub during the installation process, now is the time to reassemble them. Make sure all parts are in their proper place and secure.
Congratulations! You’ve successfully installed a bathtub drain stopper. By following these simple steps, you can enjoy a functional and convenient bathtub drain that’s easy to use.
