How to Install Roman Shades Outside Mount
Installing roman shades outside mount can be a great way to add style and functionality to your windows. These shades are designed to be mounted outside the window frame, which allows for a clean, unobstructed view and provides more privacy. Whether you’re a DIY enthusiast or a seasoned home decorator, installing roman shades outside mount is a relatively straightforward process. In this article, we’ll guide you through the steps to ensure a successful installation.
First, gather all the necessary materials and tools before you begin. You’ll need the roman shades, mounting hardware, a level, a drill, screws, a measuring tape, and a pencil. Ensure that the roman shades you’ve purchased are suitable for an outside mount installation, as some shades are designed specifically for inside mounts.
1. Measure the window frame: Begin by measuring the width and height of the window frame where you’ll be installing the roman shades. Add a few inches to each measurement to account for the mounting hardware. Write down these dimensions for reference.
2. Mark the mounting locations: Using a level and a pencil, mark the mounting locations on the window frame. For a standard installation, you’ll typically need two mounting locations, one at the top and one at the bottom of the window frame.
3. Drill the mounting holes: Using a drill and the appropriate drill bit, drill holes at the marked locations. Make sure the holes are deep enough to accommodate the screws.
4. Attach the mounting hardware: Insert the mounting hardware into the drilled holes. The hardware may come with a screw that you can use to secure it in place. Tighten the screws until the hardware is firmly attached to the window frame.
5. Install the roman shades: Place the roman shades over the window frame, ensuring that they are centered and level. Slide the shades onto the mounting hardware, following the manufacturer’s instructions. Some roman shades may have clips or brackets that attach to the mounting hardware.
6. Adjust the shades: Once the roman shades are in place, adjust them to your desired position. The shades should be parallel to the floor and evenly spaced apart. You may need to adjust the mounting hardware slightly to achieve the perfect fit.
7. Secure the shades: Finally, secure the roman shades by tightening the mounting hardware. This will ensure that the shades stay in place and function properly.
By following these steps, you’ll have your roman shades outside mount installed in no time. Remember to take your time and double-check your measurements and placements to ensure a successful installation. With the right tools and a bit of patience, you can enjoy the beauty and functionality of roman shades outside mount in your home.
