How to Repair a Dripping Delta Bathroom Faucet
Are you tired of the constant dripping sound from your Delta bathroom faucet? Do you want to save water and money by fixing it yourself? If so, you’ve come to the right place. In this article, we will guide you through the steps of repairing a dripping Delta bathroom faucet. Whether you’re a DIY enthusiast or a beginner, you’ll be able to follow these instructions and get your faucet working like new in no time.
Before You Begin
Before you start the repair process, it’s essential to gather the necessary tools and materials. Here’s a list of items you’ll need:
– A flat-head screwdriver
– A Phillips-head screwdriver
– An adjustable wrench
– A replacement cartridge (if needed)
– plumber’s grease
– Teflon tape
Step 1: Turn Off the Water Supply
The first step in repairing your Delta bathroom faucet is to turn off the water supply. This will prevent any water from leaking while you work on the faucet. Locate the shut-off valves under the sink and turn them clockwise to close them.
Step 2: Remove the Faucet Handle
Now that the water supply is turned off, it’s time to remove the faucet handle. Depending on the type of faucet you have, you may need to use a flat-head or Phillips-head screwdriver to remove the set screw that holds the handle in place. Once the set screw is loose, gently pull the handle off.
Step 3: Remove the escutcheon cap
Next, you’ll need to remove the escutcheon cap, which is the decorative cover that hides the faucet components. Use a flat-head screwdriver to remove the screws that secure the escutcheon cap in place. Once the screws are out, gently pull the escutcheon cap off.
Step 4: Inspect the Cartridge
With the escutcheon cap removed, you should now be able to see the cartridge. The cartridge is the part of the faucet that controls the flow of water. Inspect the cartridge for any signs of wear or damage. If you notice any issues, you’ll need to replace the cartridge.
Step 5: Remove the Cartridge
To remove the cartridge, use an adjustable wrench to hold the cartridge in place. Then, use a flat-head screwdriver to push the cartridge retainer clip out of the way. Once the clip is out of the way, you can pull the cartridge out of the faucet.
Step 6: Install the New Cartridge
If you need to replace the cartridge, simply insert the new cartridge into the faucet and secure it in place using the retainer clip. Apply plumber’s grease to the threads of the cartridge to ensure a tight seal.
Step 7: Reassemble the Faucet
Now that the new cartridge is in place, it’s time to reassemble the faucet. Reattach the escutcheon cap, followed by the faucet handle. Tighten the set screw to secure the handle in place.
Step 8: Test the Faucet
With the faucet reassembled, turn the water supply back on and test the faucet. If the dripping has stopped, you’ve successfully repaired your Delta bathroom faucet. If the dripping persists, double-check your work and make sure all components are properly installed.
By following these steps, you can easily repair a dripping Delta bathroom faucet and save yourself the cost of hiring a professional. Happy DIY-ing!
