How to Remove Bemis Soft Close Toilet Seats with Metal Hinges
Removing Bemis soft close toilet seats with metal hinges can be a bit tricky, but with the right steps and tools, it can be done safely and efficiently. Whether you’re replacing the seat, cleaning it thoroughly, or dealing with a jammed hinge, this guide will walk you through the process step by step.
First, gather the necessary tools. You’ll need a flathead screwdriver, a Phillips head screwdriver, a wrench, and a rubber mallet. Make sure you have enough space to work without bumping into anything.
1. Turn off the water supply: Before you start, turn off the water supply to the toilet to prevent any accidental spills or leaks. This is especially important if you’re going to remove the entire toilet seat.
2. Loosen the bolts: Place the flathead screwdriver under the bolt at the base of the toilet seat. Gently tap the screwdriver with the rubber mallet to loosen the bolt. Repeat this process for all the bolts, including the ones holding the hinges.
3. Remove the bolts: Once the bolts are loose, use the wrench to remove them completely. Be careful not to strip the bolts or damage the threads.
4. Lift the toilet seat: With the bolts removed, gently lift the toilet seat off the toilet bowl. If the seat is stuck, try tapping it gently with the rubber mallet to loosen it further.
5. Remove the hinges: If you need to remove the hinges, locate the hinge pins and gently tap them out with the flathead screwdriver. Be sure to keep track of the pins and their corresponding holes.
6. Clean the seat and hinges: Once the seat and hinges are removed, clean them thoroughly. This may involve using a mild detergent and water, or a specialized toilet seat cleaner. Be sure to dry the seat and hinges completely before reassembling them.
7. Reassemble the toilet seat: Place the hinges back into their respective holes and insert the hinge pins. Tighten the bolts securely, but be careful not to overtighten them.
8. Replace the toilet seat: Place the toilet seat back onto the toilet bowl and make sure it is level. Tighten the bolts until the seat is firmly in place.
9. Test the soft close mechanism: Once the seat is reassembled, test the soft close mechanism to ensure it is working properly. If the seat closes too quickly or doesn’t close at all, you may need to adjust the hinge pins or the tension of the hinge.
By following these steps, you should be able to remove Bemis soft close toilet seats with metal hinges without any issues. Remember to take your time and be patient, as rushing the process can lead to damage or injury. Happy DIY-ing!
