How to Change Skagen Watch Battery
Changing the battery in a Skagen watch is a relatively straightforward process that can be done at home with the right tools and a bit of patience. Whether your watch has stopped working or the time has become slightly inaccurate due to a depleted battery, replacing it is a task that most watch enthusiasts can handle on their own. Below, we provide a step-by-step guide on how to change a Skagen watch battery.
1. Gather the Necessary Tools
Before you begin, make sure you have the following tools on hand:
– A small flathead screwdriver (usually included with the watch or available at a local hardware store)
– A watch case opener or a flat blade screwdriver with a small prong on the end
– A small, soft brush or cotton swab
– A small container to hold the watch parts
2. Prepare the Watch
Place your Skagen watch on a soft, flat surface to prevent scratches. Make sure the watch is turned off to avoid any damage to the internal components. If your watch has a glass cover, it’s important to handle it with care to avoid breaking it.
3. Remove the Back Cover
Using the flathead screwdriver, remove the screws holding the back cover of the watch in place. The number of screws can vary depending on the model, so refer to the manual if necessary. Once the screws are removed, gently use the watch case opener to lift the back cover off the watch case.
4. Remove the Old Battery
With the back cover removed, you’ll see the battery and the battery holder. Carefully use the flat blade screwdriver with the prong to gently lift the battery from the holder. Be sure to hold the battery by its edges to avoid damaging the contacts.
5. Insert the New Battery
Take the new battery and align it with the contacts in the battery holder. Make sure the battery is oriented correctly; the negative side should be on the bottom. Carefully place the battery into the holder.
6. Reassemble the Watch
Once the new battery is in place, put the back cover back on the watch case. Use the flathead screwdriver to reinsert the screws, making sure they are tight but not overly so. If you have a glass cover, replace it as well.
7. Test the Watch
After reassembling the watch, turn it on and check to ensure that the time and any other functions are working correctly. If the watch is still not functioning properly, double-check the battery placement and ensure that all screws are tight.
By following these steps, you should be able to successfully change the battery in your Skagen watch. Remember to take your time and handle the watch with care to avoid any damage. If you’re not confident in your ability to perform this task, it’s always a good idea to take your watch to a professional watchmaker for assistance.
